Avaya IP Office BRI with Vega Europa Gateway

[l33byt1980]

Has any one successfully connected the IP office with this SIP gateway and managed to get the BRI to see the link as active?

ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last

 

[amriddle01]

Is it set to NT mode? I have not jused them just quickly read aboit it, but there isn't much to do with a BRI card they are pretty much plug and play

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[mattKnight]

long time no see!

I assume you've got this?

http://www.vegaassist.com/download/docs/IN_26_BRI connection_checklist_03.pdf

gateway set to P-P?
TEI set to 0?

Have you considered that you *might* need a (ISDN) crossover lead?

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[l33byt1980]

I have looked here.

http://www.vegaassist.com/download/docs/IN_26_BRI connection_checklist_03.pdf

Seems it needs to be straight.

Tried p2p and p2mp but it doesnt seem to connect at all.



ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last

 

[robboardman]

I think these gatways like this need to be connected to the PSTN to recieve clock and pass it through, is it connected to your service provider as well as the IPO?

 

[Bas1234]

Check the cables, they need to be "ISDN crossed"

No physical connection (LED off)
- check that NT is connected to TE and TE is connected to NT
- check whether a crossover is needed
- check exact cabling pinouts
3 Rx+ connects to TX+ 3
4 Rx- connects to TX- 4
5 Tx+ connects to Rx+ 5
6 Tx- connects to Rx- 6

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________