Avaya IP Office Application Server

[desphoneguy]

I have an Avaya IP Office Applications server running with an Avaya IPO 500 V2.

When I use default settings on the server and change the default IP Address IP Address on the IP Office to a X.X.X.2 instead of .1 everything can works. VoiceMail Pro functions fine and one X portal works fine.

I now try and change the default address on the server to say 192.168.10.18 and change the IP Office to 192.168.10.19 the IP Office works fine but I cannot get one X portal to connect.

I change back to the previous settings and everything works again.

What am I missing?

 

[tlpeter]

You first need to change the IP address on the server and reboot it. Then change the IPO.

BAZINGA!

I'm not insane, my mother had me tested!

 

[desphoneguy]

That is the process I followed and it didn't come up.

Is there anything with the OneX Portal configuration that needs to be changed?

 

[janni78]

How did you change the IP address of the Application Server?
Is VM Pro working with the new IP?
What isn't working with One-X, it doesn't connect to IPO or you can't access the wen interface?

"Trying is the first step to failure..." - Homer

 

[sizbut]

Go into the one-X Portal admin menus and check that the providers have changed to the new address of the IP Office system.

Stuck in a never ending cycle of file copying.