Avaya Ip Office 500v2

[alam472]

Hello everyone,
have a nice day!
I am Engineer of Cisco switches,routers and Cisco call manger.
I am new in avaya technology, i know little bit basic thing of avaya config and hardware specification.
Customer requirement is :
Avaya Digital Station : 30 (1408/1416)
Avaya Analog phone : 10
Avaya Ip phone : 50
Avaya Ip Office 500v2
customer have 4 analog trunk lines
So, i request to all if any know which type of licence,modules and where i connect the ip phone please help me !!
if any have config idea how to config these thing so please give me pdf file

thanks

 

[intrigrant]

Avaya IP 500v2 chassis
Avaya SD card
2 Rack mounting kits
Phone8 card
Combo Card ATM4
Digital Station 30 expansion module

Essential Edition license R11
50 IP Endpoint license R11

Manager software R11
Qualified Avaya engineer
PoE switches
Qualified Cisco engineer
Space in a patch cabinet 5 standard slots
Contact a Avaya reseller in your area for purhase and support

 

[ipohead]

That's a lot of phones to run off 4 analogue trunks!

 

[intrigrant]

We have a customer with 400 phones and just 2 BRI lines, never complained....

 

[Qzwsa]

I would add another combo card for additional expansion and the 10 extra VCMs. 10 seems a little low for that many IP phones unless their internal calling is as reduced as their external appears to be. I'd rather over-engineer it from the start than run into issues down the road, especially given the minimal cost of an extra combo card as part of the system.

Obviously the most important item on the list is the qualified Avaya engineer / business partner.

Qz

 

[intrigrant]

A single commbo card has 10 VCM channels, if TLS security is not used AND the used codec is G.711 AND direct mediapath is enabled then 10 VCM channels is more than enough.