Avaya IP Office 500 and Cisco CUBE

[kenbaluyut17]

Anyone knows how to configure Cisco CUBE to communicate with Avaya IP Office 500 via SIP trunk? Is it more or less the same configuration when you set it up with CUCM?
1. Setup the voice service voip and sip
2. Setup inbound dial-peer from ISP and outbound dial-peer to Avaya
3. Setup inbound dial-peer from Avaya and outbound dial-peer to ISP

Pretty much it? Can someone give me an example?

Thanks!

 

[Westi]

There is an old R6.1 document for the setup and it should get you started

https://www.devconnectprogram.com/fileMedia/download/85e65370-fd0c-4505-b13e-51e035200204

actually just found a R8.0 document too

https://www.devconnectprogram.com/fileMedia/download/fccd4ecc-e0b3-4375-908b-e024f012207e

Joe
FHandw, ACSS, ACIS