Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya IP DECT Master and Standby Master and trunk to CM

Status
Not open for further replies.

OlegPowerC

Technical User
Feb 26, 2016
34
RU
Hello!
Can You explain me next:
I configured 18 DECT stations, one of this is Master and one Standby Master.
I configured H.323 trunk to Master and H.323 trunk to Standby Master
But in XMOBILE station I provide one mobility trunk group.
How I can do redundancy?
Thank You!!!
 
Hi collegues.
I am complete task:
After master is down (I am disable PoE to it), standby master goes to active.
Then after 3-5 minutes, I check trunk group to this master (status trunk 2) and see Out Of Service
In my XMOBILE stations, field Mobility trunk group was 2 and after trunk 2 goes down, it field automatic changed to 3 :)
I do not totaly understand how it work but it work.
My DECT setup:
DECT1_huvobr.png

DECT2_oc03hp.png

Thank You!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top