Avaya interconnection with Call Manager

[jibade]

I'm trying to connect an Avaya Definity G3r to a Cisco Call Manager 6.1 via a 3845 router using E1 cards at both ends.
I cannot communicate with the Call Manager.
On the Avaya, when I do "test board", test 138 fails. When I do "status trunk 90", I get "out-of-service-NE".

 

[colby007]

How are you configuring the trunk Q-sig or Q.931?

 

[jibade]

QSIG. I kind of have the feeling it's a connection problem but the lights on my router is green showing connectivity.



display trunk-group 90 Page 1 of 10
TRUNK GROUP

Group Number: 90 Group Type: isdn CDR Reports: y
Group Name: CM Trunk 1 COR: 1 TN: 1 TAC: 804
Direction: two-way Outgoing Display? n
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: tie Auth Code? n TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send National IEs: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc

Trunk Hunt: ascend
Digital Loss Group: 13
Calling Number - Delete: Insert: Numbering Format:
Bit Rate: 1200 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0





display trunk-group 90 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none Wideband Support? n
Internal Alert? n Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member:
Send Name: n Send Calling Number: y
Used for DCS? n
Suppress # Outpulsing? n Numbering Format: public
Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Connected Number: n

Send UUI IE? y
Send UCID? n
Send Codeset 6/7 LAI IE? y Ds1 Echo Cancellation? y

US NI Delayed Calling Name Update? n

Network (Japan) Needs Connect Before Disconnect? n

 

[colby007]

How have you got your DS1 setup? Is it set for Q-sig? If you want to pass numbers and more info through try changing the numbering format on page 2 of the trunk to private.

 

[jibade]

Hi,

I can now make calls to the Cisco System but whenever a call comes in from the Cisco into the Avaya, it tells me "incompatible destination" on the Cisco Router log. It's almost as if there's a protocol mismatch or something like that but the calls get established from the Avaya to the Cisco system.

Jibade.

 

[matthartt]

Welcome to my world! LOL

Check out these threads...

http://www.tek-tips.com/viewthread.cfm?qid=1457633

http://www.tek-tips.com/viewthread.cfm?qid=1460805

I posted on there how I got it to work...but just doesn't seem to be the "best" way to program something.