Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya hunt group to Asterisk voice mail

Status
Not open for further replies.

brightkat

Technical User
Dec 28, 2005
14
Here is the scenerio: Asterisk voice mail coming from an Avaya s8700, via qsig hunt group over T1 trunk. What I am stuck on is getting Asterisk to recognize the extension dialed. What I currently get is the caller's extension, the qsig voice mail number dialed by the hunt group (using AAR), but not the extension that was actually dialed and went to coverage, which would determine where to send the call to (whose voice mail in Asterisk). So for example:

Extension 1009 calls 2790, who doesnt answer so the call goes to cover.
Coverage path goes to Hunt 253 which has a qsig message center to 8500.
8500 goes through UDP to AAR and over a route pattern to the Asterisk trunk.
What I see in Asterisk is this:
Accepting call from '1009' to '8500' on channel 0/4, span 1

Then it goes to voice mail but for 1009 (calling station). It looks like it never sees 2790, or whichever extension called, any idea how I can pass this information to it? Nothing ever shows up on a trace of the TAC unfortunately.

Any suggestions or ideas would be greatly appreciated! Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top