Avaya C363T IP Addresses of ports

[config5623]

Hi all,
I'm trying discover whet IP addresses are assigned to the 24 ports of my C3634T. I can login but can't find a command to do this.

Any help appreciated.

 

[kyle555]

eesh...going back...

Do a "show run"? I think as a layer 2 switch, it'd have IPs on its VLANs - so your IPSIs and CM control network interface would take up ports on it, but the C363 wouldn't necessarily be programmed to know about what those IPs are. It's cisco-ish, so a show ip interface/show interface/ show help might help out.

 

[config5623]

The C363T won't let me do a sh run. I tried that first. I'm scratching my head on this one. I'm reading the install manual now I'll keep you posted. I was able to display the default router IP and inband ip/24 but no success with the ports.

Thanks

 

[kyle555]

good luck!

https://downloads.avaya.com/elmodocs2/C360/Avaya_C360_4_5_UG.pdf

 

[config5623]

Kyle555

I think what I forgot to do is go into privileged mode. I try that. I'll let you know if it works.