Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya 9650 Stuck on "Phone" after reset....

Status
Not open for further replies.

jglongisland

Technical User
Feb 24, 2013
31
US
So I have two Avaya phones (9650 and 9620L) that were working fine in my old house behind a sonic wall. I moved to a new house, new sonic wall, different IP address range.

VPN to my office has all the ports open. Phones wouldn't get a dial tone so I figured I'd reset them.

Do both RESET and CLEAR on both, put in the Call Server and rebooted. It connected to the server and asked for the phone extension. Afterwards the phone is stuck with "Phone" at the top.

I've tried manually entering all the IP info in the phone as well as DHCP. Worked fine at the old location and was almost working here (i.e. buttons had words, extensions were showing). Reset and Clear seems to have put these into a state that I can't recover from.
 
 http://files.engineering.com/getfile.aspx?folder=6b904489-6fcf-4397-b8c8-a10dda337789&file=22817_21929_0.jpg
SonicWall + VPN + Avaya have never been great for me. Also try a 96x1. The 96x0 don't get firmware updates anymore which means the VPN parts could have been affected by recent updates to the 96x1 firmware.

 
H.323 was off, once we turned it on phone started working.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top