We have been changing the frequency to WMM so that the Avaya 3645 Spectralink phone can work on the network without the SVP server. This is in preparation for piloting the 8440 Spectralink phone. About a month ago, we started the frequency change. Now we have been getting complaints that the 3645s are cutting in and out on calls, there is a 5-10 second delay when someone gets a call before they can hear the caller or respond. The network people keep saying it is not the network. But I think it is a combination of the Access points (Aruba) and the network. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AVaya 3645 frequency change to WMM w/o SVP server
- Thread starter S8700Girl
- Start date
WMM is a protocol and not a frequency. Have a look at and confirm that your Aruba access points and 3645 are set correctly. The Avaya 3645 corresponds to the Spectralink 8030 in the guide.
- Status
Similar threads
