Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya 310 protection units

Status
Not open for further replies.

mikeydidit

IS-IT--Management
Feb 10, 2003
4,165
US
I have ran into one this morning that I thought I would call in some help on. I was asked about the technical specifications on the carbon protectors in the 310 protection units that I have in place. I went to the Avaya website and it wasn't much help (go figure). If anyone has a source for this information and would post it for me, I would greatly appreciate it.

Mike Jones
LSUHSC
 
Apparently there is some unit of measure for the amount of time it take one these carbon protectors to blow. I need the spec's that shows this on the carbons that go in an Avaya 310 protection unit. Thanks for your help guy's.

Mike Jones
LSUHSC
 
That link I posted worked when I submitted it, but now it's a dead link, sorry.

Jim

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top