Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya 1608 IP Phone backlight

Status
Not open for further replies.

joezzz

Technical User
Feb 9, 2007
135
DM
Hi all,


I have this customer who has 1608 IP Phones in Low lit rooms who would like that the displays turn off when the phone sits idle for 1 minute. How do I achieve this on the IP office. Currently it takes a few hours before it goes off and they'd like that it goes off after 1 minute.


thanks much
 
## BAKLIGHTOFF specifies the number of minutes of idle time after which the display backlight will be turned off.
## Phones with gray-scale displays do not completely turn backlight off, they set it to the lowest non-off level.
## Valid values are 0 through 999; the default value is 120 (2 hours).
## A value of 0 means that the display backlight will not be turned off automatically when the phone is idle.
## This parameter is supported by:
## 96x1 H.323 R6.0 and later
## 96x1 SIP R6.2 and later
## B189 H.323 R1.0 and later
## H1xx SIP R1.0 and later
## 96x0 H.323 R1.0 and later
## 96x0 SIP R1.0 and later
## 46xx H.323 R2.5, R2.7 and later
## 16xx H.323 R1.0 and later
## SET BAKLIGHTOFF 60
 
these are just the parameters from the template , it doesn't say which and how to change the desired ones?
 
you have to modify the 46xxsettings text and then set the value as above for SET BAKLIGHTOFF and then enter a value
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top