Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AV3700 mylex9600 PDU
- Thread starter Arjan1965
- Start date
The solution seems to be .. don't do a hard reset.
The mylex controller is designed to protect the disks in the event of any anomalous event such as a hard reset or a power fail. By performing a hard reset you are interrupting the mirror maintenance so it has to assume there is a problem and not allow access until the problem is corrected. You may want to use GAM (windows) or DACCF (dos)(whichever you have) and check the health of your mirrors.
The mylex controller is designed to protect the disks in the event of any anomalous event such as a hard reset or a power fail. By performing a hard reset you are interrupting the mirror maintenance so it has to assume there is a problem and not allow access until the problem is corrected. You may want to use GAM (windows) or DACCF (dos)(whichever you have) and check the health of your mirrors.
- Status