Auxillary Ringing ACS 1

[kurmann]

Installed an ACS system today in a Recycling Facility, which is extremely loud in the warehouse with all the Crushers and machinery..

Using a Pagepal and A loudspeaker is there a way to make the lines ring over the Loudspeaker?

we installed a Metal ringer as an extension, but just was not loud enough.. Any thoughts on how to get something really loud back there.. the customer does not want to spend a lot of money and we have a couple good used Pagepal's and loudspeakers here that we would like to use if possible

 

[TouchToneTommy]

If you've got a Page Pal, connect the voice pair of a station to pins 19 and 20 for "Night Bell" over paging.

Find the manual here

http://support.avaya.com/css/P8/documents/003678504

 

[kurmann]

Hmmm.. dumb question but which pins do I hook the Loudspeaker too.. I've got 19 and 20 going to a station port and have tried several loudspeakers on 13 and 15 but I can't get anything louder than a very faint ring coming out of the loudspeaker through the pagepal.

 

[TouchToneTommy]

Did you grab the manual? You do realize that the PagePal is not an amplifier, just an interface from a phone system's page port, line port, or station port to the input of an amplifier?

Yes, 13 and 15 are the output from the PagePal to the input of the amplifier (or the input of a self-amplified speaker)

 

[kurmann]

Thanks TouchToneTommy, figured it wasn't an amplifier, I got Jenne Distributors on the phone and they recommended a 103 decibel Wheelock UTA-1 so we ordered one of those for our customer.. supposedly it plugs directly into a station port and thats it.. thanks for the help!