Automatic Paging via VMPRO

[DigitalG]

HI, is there a way to program the VMPRO to automatically page on multiple phones a wav file telling them that the pause is On and 15 minutes later that the pause is off ?

 

[budbyrd]

I have been able to do a function like this but I never found a way to do it without an external timing device.

 

[derfloh]

You can create a wake up call in VMPro. But I'm not sure if there is an action to do.so.

If yes, you have to call.a short codes as wake up call that goes into a module that calls the paging and plays the message. Within this module you works have to create the wake up call for the next day.

Very vage and you have to try it out step by step. If it is reliable... Don't know.

Maybe a third party software that registers as a SIP extension would be more stable anduch easier to implement.

 

[Rhinorhino]

At one time I was going to be setting up a school with a bell timer for the beginning of school break time lunch time that would go off automatically and my discussion with someone on this thread gave me instructions how to set that up so it was automatic everyday but that was several years ago so I think the answer might be yes but it does take some detailed programming in voice manager pro.

 

[budbyrd]

I put in several school bell systems. The most reliable way I found to do it was with a Viking CTG-2A with a relay connected to a ring down analog port that called a shortcode that did a post dial. The post dial would play a wav file to a page group. If I recall correctly the shortcode needs to be a digit string that looks like an extension to the system.