Automatic break bell that will work with Valcom paging

[Crowtalks]

Customer has a CICS with Valcom paging and they are wanting an automatic break bell that will work with there paging system.

Thanks, Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint

 

[MooreTel]

Viking CTG-1 Tone Generator work great for this...

 

[bcmfiftyfan]

I like the CTG-1 too. It has a built-in clock timer that can be programmed with break times and the 600 ohm tone output can be connected to the background music input on your Valcom page control.

 

[Crowtalks]

Thanks!

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint