What is the procedure for end users to program autodials on their own phones. The buttons are programmed in software but they want to be able to change the number on the button. They want to add internal and external numbers to the buttons. I read they have to enter the program feature access code but they cannot dial anything after that to programs the button. They are using 9608 sets.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Autodial??
- Thread starter edkender
- Start date
wellco9530
Technical User
Like "busster" said you can either program a button or your users can dial the FAC for (Program Access Code) and go from there:
Remember button needs to be set for "auto-dial"
i.e:
#0 ( should hear dial tone )
Press button to change or add
Dial number i.e: 92144441234
Press button to change or add again
Press switchook....
Shold be good to go !!!!!!!
...bob...
Remember button needs to be set for "auto-dial"
i.e:
#0 ( should hear dial tone )
Press button to change or add
Dial number i.e: 92144441234
Press button to change or add again
Press switchook....
Shold be good to go !!!!!!!
...bob...
- Status
Similar threads
