TPetersonFlorida
Programmer
Does anybody know how to get a custom toolbar to load up everytime when autocad opens up?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Autocad 2004 Help !!!!
- Thread starter TPetersonFlorida
- Start date
- Status
basepointdesignz
Programmer
Hi,
What you need to do is set up your own Profile.
This is done by opening the Options dialog box (Tools >> Options), then going to the [bProfiles[/b] tab. In here you can save a your user settings and toolbars/menu states. This will be set as the default so whenever you load AutoCAD, it'll be there..
Cheers,
Paul @ basepoint designz..
basepoint designz
renegade@tiscali.co.uk
What you need to do is set up your own Profile.
This is done by opening the Options dialog box (Tools >> Options), then going to the [bProfiles[/b] tab. In here you can save a your user settings and toolbars/menu states. This will be set as the default so whenever you load AutoCAD, it'll be there..
Cheers,
Paul @ basepoint designz..
basepoint designz
renegade@tiscali.co.uk
i tried using the profile and Cad didnt always start with the proper profile. i had to put a startup switch on the shortcut in the target section of the shortcut properties. the format is as follows(if profile is on harddrive for example)"drive letter:\folder where profile is saved\your profile.arg)" the target needs to be in quotes as shown. If profile is on a server "\\server name\folder where profile is saved\your profile.arg)" the target needs to be in quotes as shown. you can also set up different shortcuts to start with different profiles. i have found this to be handy as i switch between mechanical and standard cad.
- Status