Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AutoCad 2002
- Thread starter krichard
- Start date
Kim, I noticed in your previous post (as a visitor) that you were installing cad then cancelled it....
Is this the problem you are having, or can you now get ACAD to start?
Another question! Are you using ACAD which is software or hardware locked? (hardware being the dongle, which is plugged into the parallel port, not used in USA, or in later versions of CAD in Europe)
If you are using a dongle, that could be faulty, as that is the error that would come up when you dont have it attached. Jay~
My new Tae Kwon Do website is up and running!!
~KeyTech
Is this the problem you are having, or can you now get ACAD to start?
Another question! Are you using ACAD which is software or hardware locked? (hardware being the dongle, which is plugged into the parallel port, not used in USA, or in later versions of CAD in Europe)
If you are using a dongle, that could be faulty, as that is the error that would come up when you dont have it attached. Jay~
My new Tae Kwon Do website is up and running!!
~KeyTech
- Status