Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto Wake up and Miran

Status
Not open for further replies.

Woodro

Technical User
Jul 31, 2002
78
US
I'm getting an err220 on route 22 which is my ranf route.
Why? the miran card on ch 0 has MOH. Ch1 is the same recording as MOH. Routes 23 and 24 and chls 2 and 3 of the miran have the "get up" on them and they don't err out like the route 22 does.
ROUT 22
DES AUTO-WAKEUP
TKTP AWR
NPID_TBL_NUM 0
VTRK NO
RTYP AUD
GRD IDLE
ACOD 8022
TARG 01 02
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
AACR NO

DES AUTO-WAKE-UP
TN 009 0 00 01
TYPE AWR
CUST 0
XTRK EXUT
TIMP 600
BIMP 600
AUTO_BIMP NO
RTMB 22 1
DATE 24 FEB 2004

ERR220 22 0



Woodro
 
I looked up the error code in the MERL and it says that the trunk is not responding to a control pulse from the PBX. Have you reset the trunk and/or the MIRAN card?
 
yes I have and I still get the code.
I'm wondering if maybe the ranf needs to be a ran and not an auto wakeup route. Also would it make any differenc if the gnd level was set to play rather than idle.

Woodro
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top