Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Auto shut down and Auto start up
- Thread starter Aeroboy
- Start date
To shutdown: you could create a batch program using the shutdown command and then schedule the batch file using SCHEDULED TASKS under control panel.
Syntax
shutdown [{-l|-s|-r|-a}] [-f] [-m [\\ComputerName]] [-t xx] [-c "message"] [-d[p]:xx:yy]
Parameters
-l
Logs off the current user, this is also the defualt. -m ComputerName takes precedence.
-s
Shuts down the local computer.
-r
Reboots after shutdown.
-a
Aborts shutdown. Ignores other parameters, except -l and ComputerName. You can only use -a during the time-out period.
-f
Forces running applications to close.
-m [\\ComputerName]
Specifies the computer that you want to shut down.
-t xx
Sets the timer for system shutdown in xx seconds. The default is 20 seconds.
-c "message"
Specifies a message to be displayed in the Message area of the System Shutdown window. You can use a maximum of 127 characters. You must enclose the message in quotation marks.
-d [p]:xx:yy
Lists the reason code for the shutdown. The following table lists the different values.
Syntax
shutdown [{-l|-s|-r|-a}] [-f] [-m [\\ComputerName]] [-t xx] [-c "message"] [-d[p]:xx:yy]
Parameters
-l
Logs off the current user, this is also the defualt. -m ComputerName takes precedence.
-s
Shuts down the local computer.
-r
Reboots after shutdown.
-a
Aborts shutdown. Ignores other parameters, except -l and ComputerName. You can only use -a during the time-out period.
-f
Forces running applications to close.
-m [\\ComputerName]
Specifies the computer that you want to shut down.
-t xx
Sets the timer for system shutdown in xx seconds. The default is 20 seconds.
-c "message"
Specifies a message to be displayed in the Message area of the System Shutdown window. You can use a maximum of 127 characters. You must enclose the message in quotation marks.
-d [p]:xx:yy
Lists the reason code for the shutdown. The following table lists the different values.
Have a look here.
IntelligentWakeUp 1.0.0.1
Turn on computer automatically
thread779-846356
PC Powering up by phone use
thread779-847109
System Turns Itself On - Win XP
thread779-665592
Cpu starts up when phone rings
thread779-282001
Computer Starts On Its Own.
IntelligentWakeUp 1.0.0.1
Turn on computer automatically
thread779-846356
PC Powering up by phone use
thread779-847109
System Turns Itself On - Win XP
thread779-665592
Cpu starts up when phone rings
thread779-282001
Computer Starts On Its Own.
- Status
Similar threads
- Locked
- Question
