Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Auto Message Waiting on Magix 1
- Thread starter tweege
- Start date
-
1
- #2
Well, not exactly.
If you are using one of the latest releases of Messaging there is an auto forward feature.
Also, you can use "OUTCALLING" to signal an LED on another extension.
It will turn it on, but the receiver must turn it off manually when doing it that way.
If you are using one of the latest releases of Messaging there is an auto forward feature.
Also, you can use "OUTCALLING" to signal an LED on another extension.
It will turn it on, but the receiver must turn it off manually when doing it that way.
- Thread starter
- #3
Outcalling - First enable the Mail Box that wants to turn on some body else's MW light for OUTCALLING.
Then, set the OUTCALLING number to:
#53EXTENSION_NUMBER_TO_LIGHT_UP
That will do that for you....
As for as the Auto Forward, you would have to have the latest release of Mer Mesg.
What release do you have?
Then, set the OUTCALLING number to:
#53EXTENSION_NUMBER_TO_LIGHT_UP
That will do that for you....
As for as the Auto Forward, you would have to have the latest release of Mer Mesg.
What release do you have?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question