Auto Line Select 1

[RHoltonAvaya]

I do a lot of programming of Magix and 4412 type phones. The problem is I have to have Line 1 on the button #23 position. I need to autolinsel Line #1 and have found no way to go from one page on the WinSPM to the next so I can do autolinsel from line 1 to line 2 which resides on pg 2. Any help would be appreciated.

 

[Pepperz]

Go to a phone,
Get dialtone + #00
Press an SA key
Enter *14 to begin the auto line select sequence
**14 to end
THEN
Copy this phone "template" phone
You may even want to use the "template" feature in WinSPM to do the same thing, then you can boilerplate standard configs.