Auto dst time change

[ringbacktone]

Thanks in advance for assistance on this issue. I have an OPT 11c that I perform maint on that changed time over the weekend.
I am at a loss as to where to assign this to change the time on the correct date.
I appreciate input from the forum.
RBT

 

[bhassell2000]

To apply Network Time Protocol configuration to all system elements, ensure the
configuration is done using Element Manager. CLI commands only configure the Call
Server, and may lead to inconsistent NTP operation at the system level.
To implement these commands, use the following:
• FWTM <month> <week> <day> <hour>
month = 1-(4)-12 [January-December] week = (1)-5, L [1st-5th, L is the last week of the
month] day = (1)-7 [Sunday-Saturday] hour = 1-(2)-22 [Midnight-11:00 pm]
• BWTM <month> <week> <day> <hour>
month = 1-(10)-12 [January-December] week = (1)-5, L [1st-5th, L is the last week of the
month] day = (1)-7 [Sunday-Saturday] hour = 1-(2)-22 [Midnight-11:00 pm]
• SDST ON, (OFF)
ON enables the automatic change capability OFF disables the automatic change
capability
• TDST <CR>

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Firebird Scrambler]

In the UK, we have different time changes, but the actual commands that are used are shown below from a Procomm Plus script that I have. You will need to follow Buddy's advice for the dates.

; #### "VERSION 19.xx Onwards, Time Forward / Backward 1 Hour!"
; "United Kingdom Settings!"

; txdc ("LD 2")
; txdc ("TTAD")
; txdc ("TDST")
; txdc ("FWTM 3 5 1 02")
; txdc ("BWTM 10 5 1 02")
; txdc ("SDST ON")
; txdc ("****")


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley