auto-disabling digital phones

[lowvo]

I Have an option 61 and I want to turn on the feature to auto disable digital phones when they are left unplugged. What load and command do I use?

 

[lamasu]

Ld 17
CHG
TYPE: OVLY
ENTER
ENTER ENTER ---UNTIL YOU GET TO "DROL"

there you can X35

 

[lowvo]

I went to ld 17 and under "drol" 35 is not listed

 

[Johnthephoneguy]

Thats because it is 30 that you want, not 35, if you X before there it removes it.

 

[lowvo]

so I just need to add 30 into the other list of programs and that will auto-disable the digital sets than. I know putting in an x removes it.

 

[acewarlock]

YES

 

[PERRYPJ]

WITH A 61 LD 30 SHOULD STAY IN THERE, OTHERWISE YOUR CLOCK CARDS DON'T SWITCH

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

i got confused reading that.. perry's right, if ld 30 is not in the drol, sets do not disable, clocks do not switch.. ram gets full, switches tend to ini at the worst possible times...

i've been called in on switches that would ini during a mov or an echg or during peak traffic.. drol had ld 43 only.. once i ran inv (ld 117) outed the missing sets.. reprogramed all the sets that didn't match the type, maxed out the drol.. commands were not the problem, zero maint and "dumbing" up the drol made it easy to use... but a working 61 just got slower and slower by the day.. after a normal change it took 2 minutes to get the cursor back to the screen..

john poole
bellsouth business
columbia,sc

 

[lamasu]

My apologies for giving the wrong load....it has been a while

 

[GHTROUT]

Add FLXA to the TNs CLS











~

http://www.GHTROUT.com/