Auto dial 9 using Hot D 1

[revilord]

I am trying to get fax machines to use DID's. The only issue I have is with DID's you need to dial 9 first to get an outside line. I have seen a few ways to set up the line so the system will automatically dial nine first. The way I like is to use the FTR HOT D option. I can't seem to get it to work.

First when I tried adding FTR HOT D 9 I got a SCH3060(COS must be MNL). I added the CLS MNL but then I got a SCH3058 (Wrong number of input fields) and that is where I am stuck. Help!

 

[Nortellian]

Try this format Hot d nn x...x nn=up to 31 digits maximum in target dn x...x=terminating dn. This is from the book load 10.

 

[revilord]

What would the terminating dn be?

 

[PERRYPJ]

HOY D 1 9

OLD ROLMEN WORKING ON NORTELS

 

[PERRYPJ]

SORRY FAT FINGERS HOT D 1 9

OLD ROLMEN WORKING ON NORTELS

 

[Nortellian]

terminating dn would be 9.

 

[revilord]

Thanks for your help so far. Now when I try to dial I just get dial tone. I don't know if I have missed something but here is the TN printout.

DES MOD
TN 012 0 02 15
TYPE 500
CDEN 4D
CUST 0
DN 379 0 MARP
CPND
NAME ANALOG 379
XPLN 17
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 0
NCOS 0
RNPG 0
XLST
SCI 0
CLS TLD DTN FBD XFD WTA FND HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND
CFTD SFD MRD C6D CNID CLBD AUTU
CDMD EHTA MCTD
CFXD ARHD OVDD AGTD CLTD LDTD ASCD
DDGA NAMA MIND
SHL CFHD
USRD BNRD RTDD RBDD RBHD FAXD PGND FTTU
AACS NO
FTR HOT D 9
DATE 20 APR 2004

 

[Nortellian]

All I get is dial tone also. Can not place a call. Never used hot d like this before.

 

[PERRYPJ]

TRY CHANGING THE DN TO THE ACOD OF THE RDB ALSO CHANGE THE NUMBER OF DIGITS TO REFLECT THE CHANGE. YOU CAN CHANGE THE CLS TO UNR TO DIAL ACOD

OLD ROLMEN WORKING ON NORTELS

 

[revilord]

Yes that does work.