This is a BCM 50 with a PRI expansion channels 1-6 are provisioned the problem is the cust. forwarded the old number to the new did port 201 is now ext 1908 which is the 4 numbers of the did and the line 125 is also on the phone if you call the old number it rings on the intercom 1908 saying line 065 is ringing i tried putting lines 065-71 to the aa a generic greeting comes up i changed that and put line 125 to the aa and the greeting i recorded works any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Auto Attendant problems
- Thread starter jeffmo1
- Start date
acewarlock
Technical User
What are you trying to do? I didn't understand any of that.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question