I have tried to set up a 2k network for dial up access but I can't get the modem to answer. Is this a 2k issue or an issue on the modem? It is a Hayes 56k internal modem. I know if it was an external modem I could flip dipswitches on it.
That is a known isssue with Hayes modem. You can try this workaround by modifying mdmhayes,inf file:
Before you modify the entries, you should copy and save the original .inf files
with another name or to a different folder. You may want to restore the original
files if this workaround does not work well.
In the [M1806Reg] section, make the following change:
To: HKR, Init, 2,, "AT&FE0V0W1&C1&D2S95=47S40=6<cr>"
After these changes are made, remove the modem from the Modems tool in Control
Panel and then re-add the modem. This will write the new .inf settings to the
registry.
This is exctrat from Microsoft Knowledege Base article Number: Q157827
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.