Auth Code

[someguy758]

Hello, we have a SRG50 connected to CS1000E via SIP trunk. SRG Users currently use auth codes to dial out through SIP trunk to hit the SRG T1 to telco. Is there a way to get these auth codes into the CDR from the SRG or have kind of identifier for users to be tracked when dialing out through SRG T1?

Thanx

 

[curlycord]

Maybe try the Merdian PBX forum as those guys play with SRG's a little more than the BCM or Norstar guys.

PBX forum

http://www.tek-tips.com/threadminder.cfm?pid=798

or BCM forum if stil no answers.

http://www.tek-tips.com/threadminder.cfm?pid=1361

=----(((((((((()----=
curlycord

http://www.curlycord.com