Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aures and 3700
- Thread starter POSN
- Start date
Get and install "OPOS SO for CashDrawer Driver V1.0.15.3" from the Aures support website.
In the registry HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\OLEforRetail\ServiceOPOS\CashDrawer set J2Cash1 to CD11
Then in POS Configurator DEVICE -> USER WORKSTATIONS -> Select the WS -> PERIPHERALS change the CONNECTION TYPE for drawer 1 to OPOS and the type CD11 in the DEVICE NAME box.
Reload the DB from Micros control panel, reboot the WS and you should be good to go.
If you get stuck, troubleshoot via the Aures OPOS application first. Once the drawer opens from this application then start working with RES settings.
In the registry HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\OLEforRetail\ServiceOPOS\CashDrawer set J2Cash1 to CD11
Then in POS Configurator DEVICE -> USER WORKSTATIONS -> Select the WS -> PERIPHERALS change the CONNECTION TYPE for drawer 1 to OPOS and the type CD11 in the DEVICE NAME box.
Reload the DB from Micros control panel, reboot the WS and you should be good to go.
If you get stuck, troubleshoot via the Aures OPOS application first. Once the drawer opens from this application then start working with RES settings.
- Thread starter
- #3
- Status