Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

audit stopped after sysload

Status
Not open for further replies.
Dougo123

Dougo123

Programmer
Nov 9, 2004
283
0
0
US
Brain freeze. after a sysload only doing it manually works. Running clean just not getting the messages
 
Sort by date Sort by votes
Something has changed in your CFN. The system seems to be in "basic" mode. If you have a second CPU, down your system, switch disable that active CPU and reboot the second CPU to see if it comes up normal. If not, you going to have to reload the system. Make sure you have a current backup or archive to restore. Good luck!

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question
Busy tone after hangup
Replies
1
Views
64
MoJHK
MoJHK
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
54
bltodd
bltodd
bigdave1980
  • Locked
  • Question
Option 11 system problems after power disturbance
Replies
9
Views
114
bigdave1980
bigdave1980
26th Pair
  • Locked
  • Question
CS1000: Can't logout of Sig Server after Time Change
Replies
2
Views
63
26th Pair
26th Pair
SherWat
  • Locked
  • Question
Outbound calls disconnect after 30 seconds on their own
Replies
8
Views
85
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top