Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
audit log / history ? ?
- Thread starter are34
- Start date
You can do that in LD 22 by either; If these do not populate any data for you, then look below.
REQ: PRT or REQ: PRT
TYPE: AUD TYPE: ADAN PHST
The AUDIT file is initiated in LD 17 within the password gate opener
* AUDT = YES (system then prompt SIZE maximum value is 1500 words).
The HISTORY file is intiated too In LD 17. You should have a history file defined and set the size.
*CHG
ADAN
ADAN NEW HST
SIZE 10000 (this can vary, but don’t go nuts)
REMEMBER: Each time you run an audit or phst - the information is then removed from the system.
REQ: PRT or REQ: PRT
TYPE: AUD TYPE: ADAN PHST
The AUDIT file is initiated in LD 17 within the password gate opener
* AUDT = YES (system then prompt SIZE maximum value is 1500 words).
The HISTORY file is intiated too In LD 17. You should have a history file defined and set the size.
*CHG
ADAN
ADAN NEW HST
SIZE 10000 (this can vary, but don’t go nuts)
REMEMBER: Each time you run an audit or phst - the information is then removed from the system.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
