Trying to setup an audiocodes MP114 with a Mivoice office 250 for a fax machine. We have SIP trunks into the system and have a fax machine at a remote location we need to get working but I cannot find any information anywhere for inter-op. I am not familiar enough with audiocodes to try and chip away at it and am looking for a push into the right direction. Has anybody here got one of these up and running? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Audiocodes MP114 with Mivoice office 250
- Thread starter DMilden
- Start date
You might struggle
sip and fax dont go together nicely
best bet is to force codec to g711
slow fax speed down to 14400
there are a few documents on the KMS HO1820 looks promising
If I never did anything I'd never done before , I'd never do anything.....
sip and fax dont go together nicely
best bet is to force codec to g711
slow fax speed down to 14400
there are a few documents on the KMS HO1820 looks promising
If I never did anything I'd never done before , I'd never do anything.....
- Thread starter
- #3
I have sent you an email to the above address. I have setup faxing over SIP before so I am familiar with that portion. I just don't know anything about the audiocodes and how they would interact with the Mivoice. Anything you can provide would very helpful. Thank you.
- Status
Similar threads
- Question