AUD370 err when trying to boot Meridian Mail

[telephonypirate]

Have a Meridian Mail system (vs 12.3) running on an 11c rls. 22.
Recently moved it into a new location, when I brought the system on line in it's new home...I didn't have a problem...Mail came up, was able to get in and "play" around...
NOW, however, after bringing it off line again for some maint. to the PBX, it's started acting up..
Now when I reboot I get the AUD370 err. and MM never comes up..just sits there and flashes at me....
I've checked that the MM is seated properly, checked the AML setting (which showing LYR 2 enabled, and LYR 7 down disabled-and won't let me reenable)
HELP! This is driving me to drink MORE>..was working on it for 16hrs straight,and still getting no where...

 

[sglis]

I've had a number of similar problems. Try disabling the AML link. reboot the VM and then "enl aml x acms". If that doesn't work. try disabling the link again and then do a sysload. power up the main cabinet and then the VM.

Meridian Mail can either be real easy to work with or a complete pain! Good luck.

 

[telephonypirate]

That's part of the problem, unfortunatly...
It will only let me disable the AML LYR2 link, and that doesn't seem to do the trick..
The 7 link tells me it can't be disabled, because it already is...and won't let me re-enable...