AUD093 codes continuously showing

[TelTech11]

One other response to an old thread.

I had the same issue as thread798-1493575 had back in 2008. I had continuous AUD093 codes coming out. I went through and converted the code to two tns. I found that one TN was a VOIP TN and the other was a VMGC card TN. I disabled the VOIP TN and re-enabled it but no change. I then rebuilt the VOIP TN (i2008) but still nothing changed. Then I disabled the VGMC TN and re-enabled. After a blurp of BUG codes I no longer have AUD093 codes coming out. Oh yeah I traced the VGMC TN in LD 80 and found it busy but with no call before I disabled it.
My pbx is CS1000, Pentium 4, RLS 5.00W.

PT0000
MARP NOT ACTIVATED

REQ: disu 200 0 15 18


BUG115
BUG115 : 0000C93E 072649CA 00000000 00000000 00000000 00000000 12 0747B7E6 072E4
B02 00000000 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BUG115 + 00BEE2BC 00BBB24F 00BBA015 00B9EA9B 01F90F7C
BUG115 + 00BCF6F1 00BCEABB 01781EAD 13293026 01757C2B
BUG115 + 01757AEA 0195C525 01958CC7 01958A6C 01CA3F9C
BUG115 + 01CA298D 01CA22EA 01C9EE36 01C9A448 01D1E649
BUG115 + 01D1E2E0 01D1DF13 01D1DDFF 0122F65C

REQ:
ERR008 200 0 15 18 244 0 8 27 244 0 8 27
*****