AUD083 Mystery (to me)

[trmg]

Hello All,

Recently I started getting periodic spewings of AUD083 to the console of my lab CS100M. Seems to happen sporadically but at least once a day. They typically look like this:

TIM000 07:35  15/11/2021 CPU 0 

AUD083 00320076 00000C87 00000000 0000C000 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C000 00000000 

AUD083 00320A62 00000C87 00000000 0000C080 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C080 00000000 

AUD083 00320F58 00000C87 00000000 0000C100 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C100 00000000 

AUD083 0032164A 00000C87 00000000 0000C180 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C180 00000000 

AUD083 0032242E 00000C87 00000000 0000C200 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C200 00000000 

AUD083 00322C1E 00000C87 00000000 0000C280 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C280 00000000 

AUD083 00323A02 00000C87 00000000 0000C300 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C300 00000000 

AUD083 0032BCFA 00000C87 00000000 0000C380 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C380 00000000 

AUD083 0032C2EE 00000C87 00000000 0000C400 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C400 00000000 

AUD083 0032CBDC 00000C87 00000000 0000C480 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C480 00000000 

AUD083 0032D8C2 00000C87 00000000 0000C500 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C500 00000000 

AUD083 0032DDB8 00000C87 00000000 0000C580 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C580 00000000 

AUD083 0032E8A2 00000C87 00000000 0000C600 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C600 00000000 

AUD083 0032F980 00000C87 00000000 0000C680 00000000 00000F01 00000000 00000001 0000002E
 00000003 00000000 0000C680 00000000 

VAS008 ADMIN VSID 9 CUST -- TIME & DATE  7:42:12 15/11/2021

The last thing I did recently was reconfigure a TMDI from QSIG (ISGF) to NI2, but then configured it back to QSIG (ISGF) after realizing that I can't do TIE trunks with NI2. I've seen things like this crop up with QSIG configured TMDI cards, so I've tried disabling/enabling the card, FDL-ing the card, warm rebooting the SSC, and even power cycling the entire switch.

Of course, there is also the possibility this has been happening before I made that change and I'm just now noticing it...

Wondering if any of y'all have any tips/tricks on troubleshooting this?

Thanks!