AUD083 and VM MWI stops working ...

[nawlins]

Callpilot platform 1005r Ver 5.00.41
CS1000 MG 5.5

Sporadic events occur where the CS1K starts spitting out AUD083 and MWI stops working. Quick fix is a reset on the DCH(s) and all is well. Two routes exist going to separate Cisco clusters for VoIP. Each route consists of 4 PRI, yet only the first link's DCH needs to be reset in each route for MWI to resume. Avaya has had no luck isolating root cause after multiple config change requests ... ???

 

[nawlins]

Here's and example of the error:

% AUD083 072BFB19 00000c88 00000000 00000000 00000000 00000000 00000000 0000000D 00000000
% 00000000 00000000 00000000 00000F06

No sure however does the 0c88 have relevance to a channel in trouble (12_0_2_8) ???