Good morning,
Previously i was looking on how to fix this problem on CS1k , this message from CS1K,
AUD022 0EE6600C 00000E00 00000003 00006658 00000000 00000000 00000000
They are not causing any issue on the system, but i can have a lot of to do if i want to copy an output since they appear every 2-3 sc...
I remember @yyrkroon was suggested me to proceed like this ,
Go to LD 32 and type conv 6658 and press enter. It should provide you a TN. Check the TN and see what it is and what it's doing. Do the same for E00.
Once you determine what the TNs are, either reset, disable or delete it. Then go to LD 44 and type r 2, press enter and wait for it to finish.
Now, i start this thread just to be sure of what i should since the system is up and actually working, i just do not want to mess up with the current configuration, but this output messaging really need to stop stressing people working on the system,
Thanks for any suggestion .
Thanks !
Previously i was looking on how to fix this problem on CS1k , this message from CS1K,
AUD022 0EE6600C 00000E00 00000003 00006658 00000000 00000000 00000000
They are not causing any issue on the system, but i can have a lot of to do if i want to copy an output since they appear every 2-3 sc...
I remember @yyrkroon was suggested me to proceed like this ,
Go to LD 32 and type conv 6658 and press enter. It should provide you a TN. Check the TN and see what it is and what it's doing. Do the same for E00.
Once you determine what the TNs are, either reset, disable or delete it. Then go to LD 44 and type r 2, press enter and wait for it to finish.
Now, i start this thread just to be sure of what i should since the system is up and actually working, i just do not want to mess up with the current configuration, but this output messaging really need to stop stressing people working on the system,
Thanks for any suggestion .
Thanks !
