Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Attaching disk from Clarion system 1
- Thread starter june54
- Start date
-
1
- #2
is the manufacturer.
Manuals should be available from them.
Usually it's just a matter of installing a differential scsi controller or a fibre controller (dependent upon the model you have) Adaptec 2944 is normal for the scsi...Emulex LP6/7/or 8000 for the fibre. You need Navisphere Management software to configure the disks into your desired Raid configuration or you must be saavy enough to get into the low level code of the clariion and do it the hard way. You'll save yourself a lot of time and trouble if you just have a tech come out and install it for you.
Manuals should be available from them.
Usually it's just a matter of installing a differential scsi controller or a fibre controller (dependent upon the model you have) Adaptec 2944 is normal for the scsi...Emulex LP6/7/or 8000 for the fibre. You need Navisphere Management software to configure the disks into your desired Raid configuration or you must be saavy enough to get into the low level code of the clariion and do it the hard way. You'll save yourself a lot of time and trouble if you just have a tech come out and install it for you.
- Status
Similar threads
- Locked
- Question