ATA's

[Oldtimephoneguy]

Good afternoon! I've used/had it in the past but can't find the Cisco guide to disable the port #2 on an ATA via a touchtone phone. If possible, point me in the right direction.
Thank you!

Frank. City of Cape Coral, Florida

 

[soleman52]

OPG

try this link

http://www.cisco.com/en/US/docs/voi...glish/administration/guide/h323/h3288CH5.html

I'm an OPG also...

 

[Iwontremember]

Copy the ip address of the ATA into your web browser, then go to the SCCP Parameters and change SID1 from a . to a /

Hope this helps.

Please remember to rate helpful posts........

 

[Oldtimephoneguy]

Thanks Iwontremember. That's it.
P.S. I hope I remember I sent this.

Frank. City of Cape Coral, Florida