ATA2 Question

[Andyuk1]

Hi all,

I have fitted an ATA to a BCM50 R3. I want the Analogue Phone connected to the ATA2 to just pickup line 1 when lifted, I don't want to press 9 first. Can this be done?

Any help would be great.

Mant thanks

 

[cook1082]

Go to capibilities of that set in programming and set the Hot Line to external with a 9.

 

[Andyuk1]

Thanks, worked a treat.

How would I get back to the internal system from the analogue phone. Could i use recall? I can't see where that setting is.

 

[curlycord]

This is what I do

2 intercoms
Prime line to Pool or Route
Access to Pool or Route
Hotline (External) with a Pause (Enter Feature 78 for a Pause).


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[cook1082]

If Hot Line is programmed you can't dial internal.

 

[Andyuk1]

I wanted to just pick up the Analogue phone and get the 061 line but if I wanted to call internally I could use Recall, could that be possible?

 

[ironhorse17]

You would have to assign that line to a pool and give it an acces code, then allow that extension permision to that acces code.