ATA2 Power Supply Pinout... 1

[mcisar]

Does anybody know the pinouts of an ATA2 Power supply connector (the 24V 600mA one with the 5-Pin DIN connector). I've got a client who's office was vandalized and the guy went knife-happy on a bunch of cables so I just want to slap another connector on the cable.

Thanks,
>>>>> Mike <<<<<

 

[jerryreeve]

If you have an ATA spare I remember seeing somewhere that they are the same connectors, I could not find that reference right now though. JerryReeve
Communications Systems Int'l
com-sys.com

 

[jerryreeve]

sorry, mis typed--the flash and the ata should both have the same pinouts. JerryReeve
Communications Systems Int'l
com-sys.com

 

[jerryreeve]

I found the reference; the pinout and other info is on
thread799-335486 gary 2511 made an entry about 5 entries down and states the pinouts for the power supply din connectors. also not mentioned was that the safety ground is on the middle pin of the connector.
JerryReeve
Communications Systems Int'l
com-sys.com

 

[mcisar]

Thanks for digging that up for me Jerry, much appreciated. Will get out the ole' soldering iron and give that a go

Cheers,
>>>>> Mike <<<<<