ATA Power pinout

[jpanzer]

Question:

I was looking around for some ATA's and I've found some, but they have no power adapters. I know they use standard DIN cables with a 24VAC adapter. I can get some DIN cables and I have plenty of generic 24VAC adapters. Question is, what is the pinout for power?

Thanks

John Panzer

 

[misseditbythatmuch]

I think it goes:


Pin 1 24 Vac rms
Pin 2 ground
Pin 3 24 Vac rms
Pin 4 Not Used
Pin 5 Not Used

Output should be rated for min of 600 ma