ata (cordless) features

[HUCHIMAMA]

Does anyone know the codes for norstar features for a cordless phone on an ata. features like "transfer to extension, voicecall, page, etc..." I would think there would be some sort of spree code for the norstar features. but I can not seem to figure it out. Thanks again folks.

KG

 

[MarvO1]

Sure, almost all fearure codes work as if you were from a digital set. Just substitute the FLASH key then a * , followed by the feature code on your cordless analog phone for the FEATURE key on a digital set.

For example:
to do a last number redial, press FLASH * 5
to page, press FLASH * 630

Just make sure you have a FLASH or LINK key on your analog set.

MarvO said it

 

[jerryreeve]

check out thread799-679120

JerryReeve
Communications Systems Int'l
com-sys.com

 

[HUCHIMAMA]

That was the trick. You guys are awesome thanks again for your help

Keith