ATA autodial 9

[desertinn]

WHile I am working on the GASM problem with this BCM 400 I installed an ATA for the fax machine. It is working ok but the customer has to dial 9 first then the fax number.

With a MICS and and ATA I add an F78 PAUSE but I am not sure how to set this up on a BCM so when the ATA goes off hook it automatically dials a 9 so the customer just dial the fax number

 

[norstarboy125]

You can make the fax ext. hotline the number 9. This will allow the customer to dial out not having to use 9 first.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[desertinn]

I am sorry but I do not understand your procedure for this. Can you provide step by step please

 

[norstarboy125]

It depends on if your doing the programming from a set or via EM. The prompt for hotline is found under capabilities of the set.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[desertinn]

from a computer via EM

 

[desertinn]

do you have the configuration if I am using the E.M. from a P.C.?