We have a BCM 50 Rls 5.0 and attached an ATA II to a port on the main cabinet. It comes up and we can call station to station but we get fast busy when we try dialing local or long distance. We have given the extension access to the line pool but it wont dial out. Are there issues with ATA and BCM 50?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ATA and BCM 50 Issue
- Thread starter Woodie41
- Start date
curlycord
Programmer
drtelephone
Vendor
you need to dial a 8 or a nine to get a pool you set the code up
Firebird Scrambler
Systems Engineer
Silly question, but is your analogue phone signalling set to tone and not pulse?.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads