ATA Adapter programming

[skinnypuppy56]

I have a Linksys SPA2102 adapter hooked to an EnGenius base. I really cant get these 2 to talk . I have the EnGenius setup and registered to devices.

Extension 20197 is setup as an 5010 IP device and Generic SIP phone with no luck, i reserved device MAC to assign an IP but can't access via web interface -CRAZY.

3300 CONTROLLER

 

[sarond]

Your best bet is to connect a device to the LAN port of the SPA2102 to get web access, the ATA will provide DHCP on the LAN side. By default the device doesn't allow web access from the WAN.

Once you have web access from the LAN port you can enable Web Access for WAN via a tick box.

You can also access an IVR config menu from a phone connected to the phone port of the SPA2102.

Go off hook and enter **** to enter main config menu.
Dial 7932 for enable/disable web server option.
Dial 1 to enable.