ATA 2, Rel 2

[Blackybear]

Hello All,

I would like to know if the ATA2 release 2
lets caller id go through?


Thanks

SL

 

[curlycord]

Your alive!

To my knowledge they do not, you will need a GASM.
I will contact you a little later, I have a couple...unless your MBM slots are full?

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[Firebird Scrambler]

We had the same problem in the UK with ATA's not displaying the incoming caller identification.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.net

linkedin

 

[Blackybear]

Thanks alot Guys!

Hello CurlyCord,
I'm interested with the GASM8.

I have other ATA2 that do pass the caller id but I'll check their release version.
Maybe they need to be higher!


SL

 

[curlycord]

Might need a GASM8+ (Plus) for CLID.

I only have as labelled:
Analog Station Interface
and
GASM8
I do not know if there is an actual difference or just a name change.

A reply by biv343 on this

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[biv343]

Whoa, after seeing an 18 year old reply now I'm really starting to feel old.

That brings back a memory of using a fiber expansion module in a BCM, connected to a Norstar trunk module for a customer that absolutely had to keep their analog DID trunks. Why that memory popped into my head after almost 20 years is beyond me - probably after seeing my reply about the GASM8+ not passing DNIS.