Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
%Cn -- Enable/Disable Data Compression
%En -- Auto-Retrain control
&Cn -- DCD Control
&Dn -- DTR Option
&Fn -- Recall Factory Profile
&Gn -- Select Guard Tone
&Jn -- Telephone Jack Control
&Kn -- Data Flow Control
&Qn -- Communication (Sync/Async Mode)
&Rn -- RTS/CTS (Hardware) Flow Control
&Tn -- Test Mode
&V -- View Configuration
&Wn -- Store User Profile
&Yn -- Default User Profile
&Zn=x -- Store Phone Number
)Mn -- Cellular Power Level Adjustment
*Hn -- Link Negotiation Speed
+++ -- Escape Sequence
+MS -- Select Modulation
:En -- Compromise Equalizer Setting
? -- Read Currently Selected S Register
@Mn -- Initial Cellular Power Level Setting
\An -- Select Maximum MNP Block Size
\Bn -- Transmit Break
\Gn -- Modem to Modem (Software) Flow Control
\Ln -- Select MNP Block/Stream Mode
\Nn -- Protocol Negotiation Selection
A -- Answer
A/ -- Re-execute Command
Bn -- CCITT or Bell Selection
Cn -- Carrier Control
Dn -- Dial
En -- Command Echo
Fn -- Select Modulation
Hn -- Disconnect (Hang-up)
In -- Identification
Ln -- Speaker Volume
Mn -- Speaker Control
Nn -- Automode Enable (Automatic Line Speed Detection)
On -- Return to On-Line Data Mode
P -- Set Pulse Dial Default
Qn -- Result Code On/Off
Sn -- Select a Specific S Registe
Sn=x -- Write an S Register Value
Sn? -- Read an S Register
T -- Set Tone Dial Default
Vn -- Result Code Format
Wn -- Negotiation Progress (Connect Message) Control
Xn -- Extended Result Code
Yn -- Long Space Disconnect
Zn -- Modem Reset