AT&T Partner beeps instead of rings 1

[captnamo]

We have a leased space that has an old AT&T Partner phone system. All lines used to ring on the main phone at the front desk. Somebody "played" with the phone trying to reset the system date/time, and now the phone doesn't ring. (Not sure they're connected, could be a cooincidence? Naaah!)

They hear one BEEP for an incoming call and that is all. Sounds like the ring type was changed, but I don't have a system manual.

Anyone have an idea or feature code to get these phones ringing again?

 

[TouchToneTommy]

The extension has been forwarded to another extension. The beep is the reminder that it is forwarded. At Ext. 10, press Feature and dial 11-10-10

There is also a dedicated Partner system forum at

http://www.tek-tips.com/threadminder.cfm?pid=688

To change the date and time, at Ext. 10, press Feature and dial 00, press the Left Intercom button Twice. Dial #101 and enter the date as MMDDYY. Dial #103 and enter the time as HHMM in 24-hour format.

 

[captnamo]

That was exactly it! Now phone is ringing (other phone isn't!), time and date are correct.

Thanks, Tek-Tips and TTTommy!